If the LEDs seem too bright for your environment, you can disable them. Note: This procedure only allows you to disable the status lights of the device itself. It is currently not possible to disable the status light of the Ethernet port.

Prerequisites

• You need Administrator rights to do this

To disable the status light (LEDs)

1. Go to Settings > System > Hardware and select Configure > Configure hardware settings.
2. In the dialog, select the toggles to disable the LEDs and submit the changes.
   • Result: The LEDs are now disabled.

Related topics

• About Home Assistant Green status lights
• About Home Assistant Green
• About interfaces
• Enabling Home Assistant Green status lights