Follow these steps before you pass Home Assistant Connect AUX-2 on.

What Connect AUX-2 stores

Connect AUX-2 stores its own configuration: Wi-Fi credentials, the encryption key, and other device-specific settings. It stores no Z-Wave network data, which lives on the Connect ZWA-2.

Your Home Assistant configuration is included in standard Home Assistant backups.

Remove Connect AUX-2 from Home Assistant

Remove the ESPHome device from Settings > Devices & services. If you used a Connect radio adapter with it, migrate or remove that integration separately.

Reset the device

The Reset button restores Connect AUX-2 to its factory settings and restarts it. This clears the settings the device stores.

1. Press and hold the Reset button.
2. Release the button when the status LED stays solid red.

Connect AUX-2 restarts with its factory settings. To use it again, see Set up Home Assistant Connect AUX-2.