Home Assistant Yellow Kit with CM5 Home Assistant Yellow Kit with CM4 and optional NVMe Home Assistant Yellow Standard (with CM4 pre-installed)

Migrating from Home Assistant Yellow Kit with CM4 to a CM5 Migrating from CM4 with NVMe to CM5 with NVMe Migrating from CM4 Lite with NVMe to CM5 Lite with NVMe

About Home Assistant Yellow About the LEDs About firmware options

Adding an SSD to a Yellow with an existing Home Assistant installation Installing the Raspberry Pi Compute Module 4 (CM4) Removing the Raspberry Pi Compute Module Enabling Thread support

Resetting the device Creating a backup Restoring or migrating from a backup

I can’t access the system via http://homeassistant.local:8123, what can I do? Green LED flashes 4 times short and 5 times long Using the serial console for debugging (Windows) Using the serial console for debugging (Linux/macOS) Can I reset the system? Installation on Yellow Kit - The yellow LED keeps blinking

Can I use the EDATec Raspberry Pi Compute Module 5 Active Cooler? Which SSDs are supported? Which SSDs are not supported? When do I need to replace the CR2032 coin-cell battery? What is the purpose of the 3.5 mm barrel audio jack? Can I buy the Home Assistant Yellow pre-assembled?

Is Zigbee2MQTT supported by the on-board radio? What is the serial port of the Zigbee radio? Does Home Assistant Yellow have a Z-Wave or Bluetooth radio?

Home Assistant Yellow - Quick Start Guide Home Assistant Yellow - Warranty and Safety Information Home Assistant Yellow - Datasheet Home Assistant Yellow - Declaration of Conformity for EU Home Assistant Yellow - Declaration of Conformity for UK Home Assistant Yellow - Circuit diagram / schematic