Step-by-step instructions on disabling multiprotocol support on Home Assistant Yellow.

Prerequisites

This guide assumes you have already completed the following steps:

• Have the Zigbee Home Automation (ZHA) integration up and running.
• Enabled multiprotocol support

Disabling multiprotocol support

Step 1

Configuring radio multiprotocol support

1. Go to Settings > System > Hardware.
2. Under Home Assistant Yellow, select Configure.
3. Select the Configure IEEE 802.15.4 radio multiprotocol support option.

Step 2

Configuring Yellow for Thread support

1. Select Remove 802.15.4 radio multiprotocol support.
2. Then, select the Disable multiprotocol support checkbox.
3. Wait for the setup to complete.

Related topics

• Zigbee Home Automation (ZHA) integration documentation
• Thread integration documentation
• About firmware options