Enabling debug logs For troubleshooting, it can be helpful to enable the Z-Wave debug logs. Edit this article on GitHub

Disabling the tilt indicator (stop fast blinking) on Home Assistant Connect ZWA-2 For ideal signal transmission, the antenna should be placed in a vertical position. If the antenna is not in a verti...

I'm running Z-Wave JS UI on Windows and Connect ZWA-2 fails to start or connect Symptom You are running Z-Wave JS UI on a Windows machine and want to connect Home Assistant Connect ZWA-2 to that sy...

My Connect ZWA-2 is stuck in bootloader Symptom You were running a firmware update on Home Assistant Connect ZWA-2 and are now getting a message from the Z-W...

Updating ESP32-S3 firmware on Home Assistant Connect ZWA-2 Prerequisites Home Assistant Connect ZWA-2. USB data cable to connect the Home Assistant Connect ZWA-2 to your compu...

Running the adapter recovery tool on Home Assistant Connect ZWA-2 Prerequisites Home Assistant Connect ZWA-2. USB data cable to connect the Home Assistant Connect ZWA-2 to your compu...